Packaging Requirements For Cylindrical Lithium Batteries
The packaging of cylindrical lithium batteries needs to balance product protection, electrical insulation, transportation safety, and storage stability. Specific requirements should be determined based on the battery's chemical system, rated energy, product structure, and transportation method. For common cylindrical lithium-ion cells such as 18650 and 21700, a visual inspection should be conducted before packaging to confirm that the battery casing is free from obvious deformation, damage, leakage, or other abnormalities, and that the positive and negative terminals and insulation parts are intact. During packaging, effective insulation protection should be provided for the positive and negative terminals to prevent short circuits caused by contact between the terminals and metal objects. Individual cells can be isolated using independent trays, insulating sleeves, or other suitable fixing structures. When multiple cells are packaged simultaneously, they should be arranged reasonably according to the product size and packaging design to avoid collisions, compression, or friction between the cells. The outer packaging should have sufficient mechanical strength and be equipped with appropriate cushioning materials according to actual transportation conditions to reduce damage caused by vibrations during handling, loading, unloading, and transportation. For assembled cylindrical lithium battery packs, special attention should be paid to protecting components such as output terminals, wiring harnesses, connectors, and the battery management system. Anti-static materials, insulating separators, or dedicated mounting brackets should be used where necessary to prevent loosening of the internal structure and damage to electrical connections.

Cylindrical lithium batteries should be classified and packaged according to the actual transportation method and applicable regulations, and meet the corresponding marking, labeling, and documentation requirements. For lithium-ion batteries, it is generally necessary to confirm whether the product has completed the UN 38.3 transport test, and select a compliant packaging scheme according to the transport category. Cells and battery packs should use inner packaging that can completely cover or effectively isolate the product, combined with outer packaging of appropriate strength to prevent battery movement, terminal short circuits, or packaging damage. For products such as power batteries for new energy vehicles, attention should also be paid to the current GB/T 45915-2025 "Technical Requirements for Safety and Multimodal Transport of Power Lithium Batteries," which will be implemented from February 1, 2026, covering transport packaging, consignment, loading and unloading, temporary storage, and emergency response.
The exterior of the packaging should be labeled with necessary product information, hazard markings, and handling instructions in accordance with specific transportation regulations; it cannot be handled solely based on the requirements for ordinary commodity packaging. For air, sea, and cross-border transportation, the latest requirements of the carrier should be confirmed in advance, as different modes of transportation may have different regulations regarding packaging performance, state of charge, labeling, and declaration documents. Batteries with damage, leakage, bulging, or other abnormalities should be specially assessed and handled in accordance with applicable dangerous goods regulations and must not be directly mixed with normal batteries for transportation. By standardizing packaging design, improving insulation protection, and strictly implementing transportation requirements, the risks of short circuits, collisions, and thermal runaway of cylindrical lithium batteries during warehousing, loading, unloading, and transportation can be reduced, ensuring the safe delivery of products.






